Fix Host Process For Windows Tasks Has Stopped Working

by

Have you seen the pop-up message that the hosting process of the Windows services no longer works?

It is difficult to determine the ideal cause of such an error, because the pop-up window does not display any additional information about the error. Although there is no specific reason for this error, there are a number of solutions to correct it.

It is suspected that the running tasks consume a large amount of memory or CPU, which leads to this error. Such tasks cause error pop-ups.

Without wasting a lot of time, let’s get to the core of how to fix this mistake.

Solution 1: Restoring damaged BITS files

  1. First, press Windows + R on the keyboard to start the Run dialog box.
  2. Then type in the following address and press the Enter key: ProgramDataMicrosoftNetloader .
  3. Click Next to grant administrator rights and access to folders.
  4. After opening the file explorer, delete all files starting with e.g. qmgr. B. qmgr0.dat, qmgr1.dat, etc., as appropriate.
  5. Once these files have been deleted, go to Settings → Update and Security → Windows Update.

By means of the above steps the corrupt BITS has to be replaced and the problem has to be solved. If the above files cannot be deleted, please read this article about repairing corrupt BITS files.

Solution 2: Using a clean starter loader

There are situations in which third party applications conflict with the system.

A clean download can help you correct the Host Process for Windows Services error.

Normally Windows undergoes a reboot so that the system works with minimal or no drivers and programs.

This method is used to diagnose Windows problems caused by damaged drivers and program files.

There are many ways to get your PC into a clean boot mode, but I’ll tell you the most important ones that will help you correct this error.

Step 1: Selective load start

  1. Press the Windows + R key to open the Run utility.
  2. Type msconfig and click OK.
  3. Make sure the Selective start check box is selected. You should find it under the General tab.
  4. Now uncheck the option Load startup objects on selective startup.
  5. Click the Services tab and select Hide all Microsoft Services.
  6. Click Disable All to disable all unnecessary services that may cause conflict.
  7. On the Start tab, click Open Task Manager.
  8. Deactivate all activated startup programs.
  9. Finally, click OK and restart the computer.

When everything is ready, go to the next step to solve software compatibility problems.

Step 2: Release of half of the services

  1. Press the Windows + R button
  2. Type msconfig and click OK.
  3. Click the Services tab and select the Hide all Microsoft Services checkbox.
  4. Then select half of the services from the service list and activate them.
  5. Finally, click OK and restart the computer.

Solution 3: View Open Events or Reliability History

  1. Press Windows + R
  2. Type eventvwr and then press the Enter key on the keyboard to open the Event Viewer.
  3. Double-click Windows Logs in the left pane.
  4. Then select the Application and system logs checkbox.
  5. In the next window, search for all events marked with a red X.
  6. Now check the error details. Look at the specific error that tells you that the Windows host process is no longer running.
  7. As soon as we find him, we can start solving problems.

However, if there is no useful information about this error, use the reliability history as shown below:

  1. Press the Windows key and type Reliability in the search box.
  2. In the list of search results that appears, click the View Reliability History button.
  3. Search for an event with the error message Hosting process for Windows has stopped working.
  4. Note the process causing this error and follow the troubleshooting instructions below.
  5. First remove the service directly from the control panel if the error with the above service(s) is related to a third party application.

Solution 4: Restoration of an operational system

System recovery is essentially the process of resetting the changes made to your computer and bringing your computer back to a point where you made no changes.

Occasionally, some of the programs we install on our devices, including the drivers, may cause an unexpected error on the computer system. These errors can cause Windows to behave unpredictably.

Sometimes it is useful to uninstall a program or driver you have just installed. However, this does not work in all situations and in this case you will have to solve the problem with the restore point you have created.

A restore point usually restores the system to an earlier point in the time that everything was working properly with Windows System Restore.

Perform system repair

If you have accidentally created a restore point or set automatic restore points on your PC, you can easily restore the old configuration of your PC using restore points.

Using the recovery function in Windows 10

To use the restore function in Windows 10, follow these steps:

  1. Click on the Start button and then type the control panel into the search field.
  2. Click on Control Panel in the search result to open it.
  3. Now click on the option System and Security and select the option System.
  4. Still in the system window, click on System Security. It is located in the top left corner of the system window.
  5. By following the steps above, you will go directly to the system properties window. Select the volume for which you want to perform the recovery.
  6. Then click on the System Restore button, which is located in the security settings.
  7. Click the Next button when the next window appears.
  8. You will then see a list of the restore points that have been created. Simply select the last restore point in the list and click Next.
  9. A confirmation dialog box will appear, confirm that you want to perform a system restore and then click Finish.
  10. Press the Yes button to confirm. This screen is only intended to inform you that – Once started, the system recovery cannot be interrupted.

Note that once the process has started, it cannot be stopped and must not be interrupted. So make sure your computer is turned on.

Recovery in protected mode

There are times when system recovery does not work. This is usually due to various problems with Windows or software conflicts. When this happens, it means that your computer system will not be able to return to the desired restore point.

Thanks to Microsoft, there is a way to solve this problem. Just run Windows in secure mode.

When you start your computer in Safe Mode, only the main part of Windows is started and any problematic software, applications, drivers or settings are disabled.

In general, a computer that is restored to secure mode is successful.

Follow the steps below to start your PC in Safe Mode and continue the recovery:

  1. Start the computer in secure mode using one of the methods listed here.
  2. Once your system is in Safe Mode, click the Troubleshooting option and then click Advanced Settings.
  3. Under Advanced Options you will see a list of six options, leave the rest and just click on System Restore.
  4. Select the system restore point where you want to restore the system. Make sure you select the most recent restore point.

Be patient until the end of the trial. Once the recovery process is complete, you will be taken to the login screen or desktop.

Restore if PC does not boot

If your computer does not start or Windows does not start normally, you can perform a restore.

Under these conditions, perform the following steps:

  1. Make sure the computer is turned off completely.
  2. Press the power button and continuously press the F8 button to enter the start menu.
  3. The troubleshooting window will open. Click on the Advanced Options button.
  4. Select the System Restore option and then perform steps 7 to 10 of method 1.

NOTE

Although we focus on Windows 10, the same steps can guide you through the recovery process on Windows 8.1 and Windows 7.

Although restoring the system is very useful, there are a number of things to keep in mind.

Let me shed some light on this by looking at the recovery point or the recovery process.

  • System recovery can do nothing but protect your computer from viruses and malware.
  • If you have created new user accounts since the last restore point was installed, the last restore point will be deleted, but your data and files you created will be retained.
  • The restore point does not serve as a Windows backup.

I hope that one of the above methods has helped you use system recovery on Windows 7, 6.1 and 10 and that you have now successfully fixed the Host Process error for Windows services that no longer work.

Solution 5: Starting the DISM tool

Note that you should not use the SFC command when trying to correct this error because it replaces the Microsoft Opencl.dll file with the Nvidia file.

It is therefore recommended to check the integrity of the system by executing the DISM Checkhealth command.

That’s how you do it:

  1. Press the Windows + X keys.
  2. Select the command line (Admin).
  3. Now type the following commands and press the Enter key each time:

Disassembly / Online / Image cleaning / StartComponentCleaning

Dismantling / Online / Cleaning / Restoring health

  1. If the above command does not correct the error, try the following command, replacing C:RepairSourceWindows with the location of the recovery source (Windows installation or Recovery Disk) :

Dismissal /Image:C:offline /Cleanup-Image /RestoreHealth /Source:c:testmountwindows

Dismissal /Online /Cleanup-Image /RestoreHealth /Source:c:testmountwindows /LimitAccess

  1. To check the integrity of the system, issue the DISM command:

Disassembly / Online / Cleaning Image / Health check

  1. Restart the computer to make the changes take effect and then check to see if you have corrected the error.

Solution 6: Perform system file check

If the DISM tool did not help, the SFC tool may be useful.

  1. To access the Run utility, press the Windows + R keys on your keyboard.
  2. Now type cmd, press Enter, and click Yes to start the command prompt with administrator privileges.
  3. As soon as the command line is open, type this command:

cfc/scans

  1. Press the Enter key to execute it.
  2. Please be patient until the SFC scanner has recovered the damaged files. Do not close the command line or turn off the computer during this time.
  3. Restart the machine after scanning is completed.

Solution 7: Running CCleaner and Malwarebytes

  1. Start by downloading CCleaner and Malwarebytes.
  2. Install both programs and then run Malwarebytes.
  3. Give it time to scan your system and check for dangerous files. When malicious software is detected, this program removes it automatically.
  4. Open then CCleaner
  5. Go to the Cleaning section and click on the Windows tab.
  6. Check the following items for cleaning, and then click Run Cleaning. Give the process time.
  7. If you want to continue cleaning the system, go to the Registration tab and check the following:
  8. Select search by question
  9. Give the application permission to scan
  10. Click the Correct selected problems button.
  11. Select Yes when the cleaner asks if you want to save the changes to the registry.
  12. Choose Correct all selected problems and the backup process is complete.
  13. Restart the computer to save the changes.

Solution 8: Organizing a souvenir86

NOTE:

Make sure you have access to another PC, because we need to download the software and write it on a USB stick.

Since this repair takes a long time, you should do it at night or when you have nothing important to do.

When everything is ready, follow the instructions below:

  1. Connect the USB stick to your system.
  2. Download and install the Windows Memtest86 USB Flash Drive Auto Installer.
  3. After installing the software, right-click on the image file you have just downloaded and select Extract here. Open the folder and start the Memtest86+ USB Installer.
  4. In the following window, select the USB storage device to which MemTest86 is to be written. Please note that your USB stick will be formatted during this process.
  5. After writing the program, disconnect the USB stick and connect it to the computer on which the hosting process of Windows Services seems to have stopped.
  6. Reboot your computer
  7. Choose to boot from a USB stick and Memtest86 will immediately start testing for memory corruption.
  8. If your computer passes all the tests performed by this tool, your memory will work properly. However, if the other steps fail, Memtest86 will detect corruption in the memory. This means that this error is caused by a damaged memory.
  9. To fix the Windows Services host process error, simply replace the RAM.

You can also consult:

Related Tags:

dism host servicing process high cpu,system high disk usage on startup,backgroundtaskhost exe disk usage,should my disk usage always be at 100,igfxem module high disk usage,windows 10 shell infrastructure host high cpu,how to clean boot win 7,host process for windows services,com surrogate has stopped working windows 7,host process has stopped working windows 7,host process for windows tasks 100 disk,host process for windows tasks has stopped working windows xp,com surrogate has stopped working,windows 10 host process for windows tasks stopped working,host process for windows services has stopped working windows 7,service has stopped working windows 7,host process for windows tasks high disk windows 10